Oak AA grade Finger jointed and continious stave boards
Wood Defects | Approved defects and tolerances |
---|---|
General | The elements must be pre-selected according to wood structure and uniform colour. |
Way of cutting | Horizontal and quarter cut cutting is allowed. Mirror maximum in 5% is allowed – preferably only one side. The fibres must be straith. |
Sapwood | Not allowed |
Pith | Not allowed |
Bark pocket | Not allowed |
Colour variation | Not allowed |
Cross grain | Not allowed |
Insect damage | Not allowed |
Knots | Sound knots maximum 2 mm diameter and maximum 2 pieces/ running meter is allowed. |
Crack | Not allowed |
Decay | Not allowed |
Oak AB grade Finger jointed and continious stave boards
Wood Defects | Approved defects and tolerances |
---|---|
General | The elements must be pre-selected according to wood structure and colour. |
Way of cutting | All cutting direction is allowed. Mirror maximum in 10% is allowed – preferably only one side. The fibres must be straith. |
Sapwood | Sound and not discoloured sapwood on the B side is allowed. |
Pith | Not allowed |
Bark pocket | Not allowed |
Colour variation | Natural colour variation is allowed, however, not decay and grey. |
Cross grain | Slighty cross grain is allowed as long as it does not have negative impact for the further processing. |
Insect damage | Not allowed |
Knots | Sound knots maximum 5 mm diameter and maximum 2 pieces/ running meter is allowed. |
Crack | Not allowed |
Decay | Not allowed |
Oak AC grade Finger jointed and continious stave boards
Wood Defects | Approved defects and tolerances |
---|---|
General | The elements must be pre-selected according to wood structure and colour. |
Way of cutting | All cutting direction is allowed. Mirror maximum in 20% is allowed. |
Sapwood | Sound and not discoloured sapwood on the C side is allowed. |
Pith | Not allowed |
Bark pocket | Not allowed |
Colour variation | Natural colour variation is allowed, however, not decay and grey. |
Cross grain | Slighty cross grain is allowed as long as it does not have negative impact for the further processing. |
Insect damage | Not allowed |
Knots | Sound knots maximum 5 mm diameter and maximum 2 pieces/ running meter on the A side is allowed, Sound knots maximum 20 mm diameter and black knots maximum 5 mm diameter on the C side is unlimited allowed. |
Crack | Not allowed |
Decay | Not allowed |
Oak BB grade Finger jointed and continious stave boards
Wood Defects | Approved defects and tolerances |
---|---|
General | The elements must be pre-selected according to wood structure and colour. |
Way of cutting | All cutting direction is allowed. Mirror maximum in 10% is allowed – preferably only one side. The fibres must be straith. |
Sapwood | Sound and not discoloured sapwood on both sides is allowed. |
Pith | Not allowed |
Bark pocket | Not allowed |
Colour variation | Natural colour variation is allowed, however, not decay and grey. |
Cross grain | Slighty cross grain is allowed as long as it does not have negative impact for the further processing. |
Insect damage | Not allowed |
Knots | Sound knots maximum 5 mm diameter and maximum 2 pieces/ running meter is allowed. |
Crack | Not allowed |
Decay | Not allowed |
Oak BC grade Finger jointed and continious stave boards
Wood Defects | Approved defects and tolerances |
---|---|
General | The elements must be pre-selected according to wood structure and colour. |
Way of cutting | All cutting direction is allowed. Mirror maximum in 20% is allowed. |
Sapwood | Sound and not discoloured sapwood on both sides is allowed. |
Pith | Not allowed |
Bark pocket | Not allowed |
Colour variation | Natural colour variation is allowed, however, not decay and grey. |
Cross grain | Slighty cross grain is allowed as long as it does not have negative impact for the further processing. |
Insect damage | Not allowed |
Knots | Sound knots maximum 5 mm diameter and maximum 2 pieces/ running meter on the A side is allowed, Sound knots maximum 20 mm diameter and black knots maximum 5 mm diameter on the C side is unlimited allowed. |
Crack | Not allowed |
Decay | Not allowed |
Oak CC+ grade Finger jointed and continious stave boards
Wood Defects | Approved defects and tolerances |
---|---|
General | The material has been produced from sound logs. |
Way of cutting | All cutting direction is allowed. Mirror is unlimited allowed. |
Sapwood | Sound, slightly discoloured sapwood both side is allowed. |
Pith | Thouch os pith on both sides is allowed as long as the crack along the pith is not exceeding 1 mm. |
Bark pocket | Bark pocket is up to 50 mm lenght allowed and maximum 2 pieces/ running meter. |
Colour variation | Natural colour variation is allowed, however, not decay and grey. |
Cross grain | Cross grain is allowed as long as it does not have negative impact for the further processing. |
Insect damage | Not allowed |
Knots | Sound knots maximum 20 mm diameter and black knots maximum 5 mm diameter on the C side is unlimited allowed, sound knots maximum 30 mm diameter and black knots maximum 10 mm diameter on the C+ side is unlimited allowed. |
Crack | Not allowed |
Decay | Not allowed |
Oak DD grade Finger jointed and continious stave boards
Wood Defects | Approved defects and tolerances |
---|---|
General | The material has been produced from sound logs. |
Way of cutting | All cutting direction is allowed. Mirror is unlimited allowed. |
Sapwood | Sound, slightly discoloured sapwood both side is allowed. |
Pith | Thouch os pith on both sides is allowed as long as the crack along the pith is not exceeding 1 mm. |
Bark pocket | Bark pocket is up to 100 mm lenght allowed and maximum 2 pieces/ running meter. |
Colour variation | Natural colour variation is allowed, however, not decay and grey. |
Cross grain | Cross grain is allowed as long as it does not have negative impact for the further processing. |
Insect damage | Small insect holes are allowed, however, not living insects. |
Knots | Sound knots maximum 40 mm diameter and black knots maximum 20 mm diameter on the is unlimited allowed. |
Crack | Not allowed |
Decay | Not allowed |